About Us

Welcome to VIBRO TECHNOLOGIES & ENGINEERING PTE LTD (The Lubricants & Vibration Specialist).


VIBRO TECHNOLOGIES & ENGINEERING PTE LTD (VIB-TECH) was established in 1997 with core businesses in specialty lubricants, equipment condition monitoring/consultancy, preventive maintenance programs and training.


Our MISSION is to provide ULTIMATE Preventive/Predictive Maintenance Solutions for our customers to enhance the lifespan of their machineries and equipments.


Our VISION is to be a WORLD CLASS LEADER in producing and providing QUALITY and ULTIMATE Preventive Maintenance Products and Services for customers to meet their operational needs.


Slideshow Image 1 Slideshow Image 2 Slideshow Image 3 Slideshow Image 4

www.damalini.com

AUTHORIZED EASY LASER
SERVICE CENTER

Performing Calibration & Repair for Easy Laser Alignment Equipments
Call Us +65 67492426

Corporate Member /
Foreign Rep of VI USA




Quality Certificate Achieved

Our Wide Range Of VIB-TECH SERVICES

Lubricants VIB-TECH Services Calibration Services
  • Selection & recommendation of appropriate lubricants.
  • Implementation of lubrication systems.
  • Equipment/Plant audit and field trials.
  • Regular inspection and performance analysis field samples.
  • Machine condition monitoring/maintenance programs.
  • Vibration analysis services - monthly or ad-hoc basis
  • On-site balancing
  • Laser shaft/ LineBore alignment
  • Ultrasound inspection
  • Noise monitoring / control
  • Customised training program
  • Commercial/Marine/Offshore Comfortability Inspection
  • Authorised easy laser service center
  • Calibrate full range of laser shaft / geometrical instrument
  • Sensitivity check for vibration accelerometer, displacement probe, velocity meter, etc

Vibro Training Center

The objective of the courses is to prepare you to be a better analyst. The courses will enable you to gain understanding of vibration principles and techniques and add to your practical knowledge of machines.

The courses are designed to provide you with theory, techniques, and procedures as well as practical case histories that illustrate ways to analyze various types of equipment. In-class demonstrations and workshops will help you learn the methods used to solve vibration problems.


Click below for course training details. Or call the Course Coordinator at 65-6749-2426 to register for the course.

Course A 4-Day Course + 2-hour Exam
Introduction To Machinery Analysis (IMV): Vibration Analyst Category I
Exam from Vibration Institute USA

pdf
Course B 5-Day Course + 3-hour Exam
Basic Machinery Analysis (BMV): Vibration Analyst Category II
Exam from Vibration Institute USA

pdf
Course C 5-Day Course + 4-hour Exam
Machinery Vibration Analysis (MVA): Vibration Analyst Category III
Exam from Vibration Institute USA

Course D 1-Day Workshop: Maintenance Problem Solving (Site Failure)

pdf
Course E 1-Day Workshop: Laser Alignment Technology

Contact Us

Singapore (HQ)

VIBRO TECHNOLOGIES & ENGINEERING PTE LTD

60 Ubi Crescent #01-05 UBI Techpark

Singapore 408569

Tel: (65) 6749 2426 Fax: (65) 6749 2428

Email:vibtech@vib-tech.com


Malaysia

VIBRO TECHNOLOGIES (MALAYSIA) SDN BHD

69 Jalan SME 3, Kawasan Perindustrian SME

81000 Bandar Indahpura Kulai Johor Darul Takzim, Malaysia

Email:vibtech.msia@vib-tech.com

Career

If you are interested in any of the following, please send your resume to: office@vib-tech.com


Sales / Marketing


Field Services / Operations

Assistant Engineer, Field Service

- Assist to perform machinery corrective works and site installation/servicing of lube system

- Nitec/Dip in any engineering discipline, preferably with field exp

- OJT and certified Training will be provided

- Possess valid class 3 driving licence a must


Information Technology

IT Engineer / Specialist

- Assist the Manager to handle on-line project and manage the development

  and implementation of new software/solutions/applications

- Perform UAT & experience in Cloud application preferred

- Dip/Deg in Computer IT with good programming knowledge

Promotions

Products > Types of Lubricants > FRANCOL Lubricants

Products > Lubrication System > Single Point > FRANCOL VIBLUBE SP 250cc

  • Reliable
  • Efficient
  • Easy To Use & Control
  • Cost Effective
  • Compact & Rugged
  • No Maintenance Required
  • 250cc

Products > Lubrication System > Single Point > FRANCOL VIBLUBE SP 120cc

  • Capacity 120cc
  • Simple to Operate
  • Easy to Install
  • Disposable
  • Economical

Products > Vibration Software > Commtest Ascent

Benefits Of Ascent Software

Ascent vibration analysis software is a comprehensive and powerful data analysis and archiving tool, integral to the vbSeries from Commtest.

Although highly developed with an impressive list of advanced features, the simplicity of the Ascent program makes it an invaluable tool ideal for those implementing a vibration analysis program for the first time.

Ascent software is provided in three levels, with each new level providing greater benefits and more advanced capabilities.

Products > Ultrasound Instrument > SDT200

SDT200 ultrasonic detector

The most complete range of sensors

  • The SDT200 detector is equipped with an internal ultrasonic sensor and laser pointer.
  • In its broad range of optional sensors (contact probe, flexible sensor, etc.) the SDT200 detector is the only one to offer additionally:
    - A parabolic sensor with laser beam
    - A threaded sensor with magnet and mounting pads
    - An extended distance cone
    - An hygrometer
    - A built-in pyrometer.

Products > Ultrasound Instrument

SDT270 is ATEX Certified (EX)
Ranges:
  • SDT270B
  • SDT270SS
  • SDT270SD
  • SDT270SU
  • SDT270DD
  • SDT270DU

features:
  • Leak Detection
  • Bearing Condition Monitoring
  • Steam Trap Inspection
  • Valves & Hydraulics
  • Pump Cavitation
  • Boiler, Heat Exchanger & Condenser Leaks
  • Reciprocating Compressors
  • Electrical Inspections
  • Tightness Integrity - Wind Noise & Water Leaks
  • Energy Conservation
  • Temperature Speed/Tacho

Products > Other Accessories > Balancing Accessories

  • Steel Balancing C-Clamp 29 -233gm
  • SS Balancing C-Clamp 59 - 180gm
  • Backward Incline Clips - 14/28/42 gm

Products > Lubrication System > Single Point > ATS ELECTROLUBER - Mini 125cc / Jumbo 475cc

  • Reliable
  • Efficient
  • Easy To Use
  • 125cc / 475cc

Products > Lubrication System > Single Point > SIMALUBE - 30/60/125/250cc

  • Compact
  • Easy to Use
  • 30cc/60cc/125cc/250cc

Products > Lubrication System > Multi Point > FRANCOL INTELLIGENT SYSTEM (ILS-M) - Multi Ports (125/250/500cc)

  • High operating pressure of 20kg-f/cm2 (280psi)
  • Anti-vibration, break free design (Low weight balance)
  • Precise dispensing control
  • Cost effective
  • Compact and convenient
  • Easy and read LCD display
  • Wide operating tempearture range

Products > Lubrication System > Multi Point > FRANCOL INTELLIGENT SYSTEM (ILS-G5) - For Oil (500cc)

  • Operating temperature: -15°C ~ 60°C
  • Available Oil Viscosity Range: 46 ~ 10,000 cSt@40°C
  • Operating pressure: 280psi (20kgf/cm2)
  • Default setting: 1 month
  • Variable settings available: ½, 12, 1, 2, 4, 6, 12, 18 & 24 months
  • D.C 4.5 Volt Standard Alkaline Battery
  • LCD Locking system included

Products > Lubrication System > Multi Point > Francol MP-C2/3 Oil Lubricator

MP-C2/3 Oil Lubricator

Synchronized Lubricant With Machinery Microprocessor Controlled

  • Reservoir Capacity : 2 Ltr / 3Ltr
  • Easy Operators
  • Reliable
  • Multi-Ports Lubricating Function
  • Cost Effective
  • Time Memory Function
  • Interval Timer
  • Low Oil Level Switch
  • Low Oil Alarm Signals
  • Thermal Overload Cut Off
  • Constant Pressure Take Off

Products > Lubrication System > Multi Point > FRANCOL INTELLIGENT SYSTEM (ILS-Extreme) - Ex Proof (125/250cc)

  • Operating temperature: -10ºC ~ 50ºC Standard Battery & -40ºC ~ 60ºC Lithium Battery
  • Max Operating pressure: 200psi (1.5kgf/cm2)
  • Variable Timer Setting
  • Remote Installation up to 10 feet (3 meters)
  • Installation Thread: 3/8 inch NPT (adaptor optional)

Products > Lubrication System > Multi Point > ATS ELECTROLUBER - ULTIMATE MD2000 (125/250/475cc)

  • Refillable
  • Adaptable
  • More Power
  • Easy To Use
  • 125/250/475cc

Products > Lubrication System > I-Can Drums - 2/5/10

  • Fully Sealing System
  • Innovative Color Coding
  • Square Shaped Drums
  • Interchangeable Nozzles
  • Quick Fill Port
  • Large Carrying Handles
  • Light-switch Style Breather Vent
  • Adhesive iPouches
  • Smart Accessories

Products > Vibration Instrument > Vibration Analyser > EZ108

EZ-108 - Portable, Light, Easy To Use Vibration Analyser

  • Route Measurements downloaded from PC Software
  • Real time display of vibration waveform or spectrum
  • Integrated 30:1 infrared temperature measurement
  • Explosive proof version is available/optional
  • Multi-communication available: Wi-Fi or USB
  • Waveform/Spectrum Analysis
  • Manual input function
  • Output to computer
  • Set equipment status
  • CE marking available
  • RFID card compatible
  • Balancing

Products > Vibration Instrument > Vibration Analyser > Easy Viber

  • Built in program in several languages
  • Route managements downloaded from PC-program
  • Balancing with two transducers simultaneously
  • Additional Frequency Analysis with transfer to PC
  • Envelope
  • Time Signal
  • Coast-Up and Coast-Down
  • Vibration/Phase measurement for vibration
  • Total Level
  • Bearing Condition
  • Output to printer and computer

Products > Vibration Instrument > Vibration Analyser > VMI X1

  • Simple & Handy
  • Easy To Use
  • Economical

Products > Vibration Instrument > Vibration Analyser > VMI X2

  • VIBER X2™ is designed for maintenance/repairer and operators personnel that needs a reliable, fast and easy to use tool for basic condition monitoring checks in rough conditions.

Products > Vibration Instrument > Vibration Analyser > VMI X3

  • VIBER X3™ is designed for maintenance/repairer and operators personnel. It is an excellent tool, for basic condition monitoring checks, easy to use and reliable for status analyse.

Products > Vibration Instrument > Vibration Analyser > VMI X5

  • The VIBER X5™ is the latest evolution building on the populat Easy Viber™. The X5 combines the extreme performance of the Texas Instrument DSP processor with the experience and popular features of the Easy Viber, all in a rugged heavy duty casing!

  • P/S: Class I Div 2 Approval - To Be Advised

Products > Motor Current Tester

  • Portable and battery powered
  • Monitors Power Circuit, Insulation, Stator, Rotor, and Air Gap
  • Variable test voltage from 250 to 5000V
  • Measures insulation resistance with resolution to 10µΩ using a 4-wire bridge test measurement.
  • Measures capacitance (pF) and inductance (mH)
  • Six channel simultaneous acquisition
  • Torque and efficiency analysis
  • Impedance and phase angle measurement
  • Power and current signature tests

Products > Scope Instrument

MoVeo Videoscope

The new MoVeo videoscope from KARL STORZ offers fully integrated display, LED light source, and intuitive operating software, providing the user optimal mobility with a class-leading tip angulation.


Ergonomically designed to fit properly into the hand, it can be used for long periods with no operator fatigue.


The MoVeo videoscope is engineered and built for the direct and remote visual inspection of complex technical systems like turbines, rotating machinery and bearings without the need for time-consuming disassembly or causing any damage to the object inspected.


Products > Vibration Instrument > Ex Proof Vibration Analyser > Commtest VB Series

  • vbSeries (vb8, vb7, vb6 & vb5)
  • Reliability, accuracy and usability
  • Five year intrument warranty
  • Free software updates to the original registered owner
  • Improved ergonomics for walk around data collection
  • Large, high resolution (HVGA) backlit LCD
  • True left- and right-handed operation
  • Multi-channel on route recordings (collectors and analyzers only)
  • 1 GB memory - virtually unlimited spectra and waveform storage
  • Lightweight, rugged IP65 rated cases
  • DC coupled sensor support
  • 12 800 lines of resolution
  • 40 kHz Fmaz
  • Single, dual or four-channel recordings depending on model
  • CSA Class 1, Division 2 Hazardous Locations certification
  • USB host port for data transfer to external USB memory
  • For more information, please visit www.commtest.com for more details

Products > Vibration Software > Spectra Pro

  • Analysis Program for Easy-Viber & Easy-Balancer
  • Easy database design with templates and machine pictures
  • Calculation of machine fault frequencies including a bearing database
  • Several shaft speeds in database with Speed set in database, Calculation speed and Measured speed

Products > Vibration Software > Vibshape

  • Animated program for Machine Vibration
  • Drawing cubes, boxes and cylinder
  • Can move, delete or copy junctions
  • Measure data can be entered while model is vibrating 'Live'

Products > Vibration Hardware

  • Vibration Sensors & Transmitters
  • Intrinsically Safe Vibration Sensors & Transmitters
  • Cables & Connectors
  • Mounting Hardware
  • Installation Tools & Test Equipment
  • Loop Sensor
  • For more information, please visit http://www.ctconline.com/

Products > Online Monitoring > VM110

  • 16 channels automatic data collector
  • Connect to PC
  • Mainly for continous monitoring of rotating machines
  • Operating as a slaves, a serial converter RS485 to RS232 must be used on PC side

Products > Online Monitoring > InnoVib I

InnoVib I - Your Ultimate On-Line Solution


The InnoVib I and WiSysPro, is an advanced online vibration monitoring system. It collects vibration and temperature signals from 16 sensors and transfers the data to the WiSysPro which analyses the data and provides detailed and accurate health information of any rotating machine and its associated components.


InnoVib I, together with WiSysPro software, provides you a real time, intelligent, cost-effective, round-the-clock online monitoring solution for your valuable rotating machineries.


Please call us for more details.

Products > Online Monitoring > InnoVib II

InnoVib II - Your Ultimate Wireless On-Line Solution


The InnoVib II and WiSysPro, is an advanced wireless vibration monitoring system. InnoVib II collects vibration and temperature signals from the wireless sensor via ZigBee technology. It supports up to 60 wireless sensors. It transfers the data collected to the WiSysPro for analysis.


The WiSysPro, developed by Vibro Tech, is an intelligent vibration analysis software that analyses the data received from InnoVib II and provides detailed and accurate health information of any rotating machine and its associated components.


Please call us for more details.

Products > Balancing Instrument > VMI X5 Balancer

Products > Balancing Equipment > BM150 BM400

  • Capacity 150 or 400 kg

Products > Balancing Equipment > Commtest vb Balancer

Key features

  • Modular design for system expansion
  • Compact, easy to install
  • 4 to 32 channel options, expandable in the field
  • Powerful Ascent Level 3 vibration analysis software
  • Common software platform supports both vbOnline and vb portable systems
  • Simultaneous dual channel data sampling
  • Single user PC or network compatible
  • Ethernet wired or wireless connection
  • 24 bit analog to digital conversion
  • Intelligently designed to accept machine data from the following sensor types:
    • Accelerometers
    • Velocity probes
    • Proximity probes
    • AC/DC signal
    • 4-20 mA
  • Automatic detection and reporting of alarms
  • Plant personnel alerted by e-mail or text message
  • Event-triggered data collection
  • AscentView™ web-based machine reporting tool

Products > Online Monitoring > Commtest vb Online

Key features

  • Modular design for system expansion
  • Compact, easy to install
  • 4 to 32 channel options, expandable in the field
  • Powerful Ascent Level 3 vibration analysis software
  • Common software platform supports both vbOnline and vb portable systems
  • Simultaneous dual channel data sampling
  • Single user PC or network compatible
  • Ethernet wired or wireless connection
  • 24 bit analog to digital conversion
  • Intelligently designed to accept machine data from the following sensor types:
    • Accelerometers
    • Velocity probes
    • Proximity probes
    • AC/DC signal
    • 4-20 mA
  • Automatic detection and reporting of alarms
  • Plant personnel alerted by e-mail or text message
  • Event-triggered data collection
  • AscentView™ web-based machine reporting tool

Products > Alignment Instrument > E-Series > E710

Products > Alignment Instrument > E-Series > E530

Products > Alignment Instrument > E-Series > E420

Products > Alignment Instrument > E-Series > E910

Easy-Laser™ E910 Flange
Part No: 12-0525

Evaluate direclty in true 3D

See the result as a true 3D image in the display unit directly after measuring. Then evaluate the result easily with different calculation settings, for example three point reference, best fit or all positive. This can also be done directly on site without having to stop to go to a PC with seperate analysis programs, which was the case previously. This makes production much more efficient.

The system includes laser transmitter D22 with manual rotatable head, and with the option of deflecting the laser beam 90°. With a few more accessories the system can also be used to check the parallism of the two tower flanges. In the measurement system's display unit it is possible to generate a PDF report containing graphs and measurement data. All information about the measurment object is documented.

Products > Alignment Instrument > E-Series > E915

Easy-Laser™ E915 Flange Spin
Part No: 12-0526

Measure with spinning laser. Evaluate direclty in true 3D

See the result as a true 3D image in the display unit directly after measuring. Then evaluate the result easily with different calculation settings, for example three point reference, best fit or all positive. This can also be done directly on site without having to stop to go to a PC with seperate analysis programs, which was the case previously. This makes production much more efficient.

The system includes laser transmitter D23 Spin with power rotating head. This is how it works in brief: The laser beam from the transmitter rotates constantly and creates a reference plane over the entire measurement object. Measurements are performed quicker as you do not have to align the beam for each new measurement position. You place the detector at the desired measurement points and register the reading by a push of a button. In principle, one person can perfrom the measurment themselves. It is then possible to generate a PDF report containing graphs and measurement data directly from the measurement system's display unit. All information about the measurement object is documented.

Products > Alignment Instrument > E-Series > E540

Products > Alignment Instrument > E-Series > E920

Products > Alignment Instrument > E-Series > E930

Products > Alignment Instrument > E-Series > E940

Products > Alignment Instrument > E-Series > E950

Products > Alignment Instrument > E-Series > E960

Products > Alignment Instrument > E-Series > E970

Products > Alignment Instrument > Ex-Proof > D130

Products > Alignment Instrument > Ex-Proof > D550

Products > Alignment Instrument > Pulley > D150

Easy-Laser™ D150 BTA digital
Part No: 12-0310

Align with tolerances with digital display

Easy-laser™ D150 has a combined detector/display instead of targets. The laser transmitter generates a laser plane that lies parallel to the reference pulley. The detector reads off the position in relation to the laser plane and displays the parallel an angle phase digitally live. This makes alignment of the adjustable machine extremely easy. The accuracy of the reading means that you can be within the prescribed alignment tolerances and rely upon the result. Suitable for most types of drive, such as V-belt, timing belt, flat and chain drives.

Products > Alignment Instrument > Pulley > D160

Easy-Laser™ D160 BTA digital
Part No: 12-0411

"Live" digital read outs where making adjustments

Easy-laser™ D160 has a seperate detector unit and display unit. This means you can read and follow the alignment from where you are standing and making adjustments. The backlit display also makes it easier to read in poor light conditions.

The detector reads off the position in relation to the laser plane and digitally displays the parallel and angular misalignment "live". This makes alignment of the adjustable machine extremely easy. The accuracy of the reading means that you can be within the prescibed alignment tolerances and rely upon the result. With this system there is no need to move the detector to read horizontal respectively vertical values, which saves time and makes things easier. Suitable for most types of drive, such as V-belt, timing belt, flat belt and chain drives.

Products > Alignment Instrument > Pulley > D90

Easy-Laser™ D90 BTA
Part No: 12-0415

For quick and easy alignment of sheaves/pulleys

Easy-laser™ D90 is installed in a few seconds, and the laser line that is projected on the targets clearly shows how to adjust the machines. The tool has targets that can be read out "visually" and which give excellent degrees of accuracy that are sufficient for most users. If, in the future, you wish to have the option of digital readouts with the corresponding advantages, you can add a digital detector (see system D150 and D160).

D90 BTA is compact and light. Suitable for most types of drive, such as V-belt, timing belt, flat belt and chain drives.

Products > Other Accessories > Shim Plate / Set

  • PRE-CUT STEEL SHIMS
  • Safer Work Place
  • More Reliable
  • Increased Accuracy
  • Cost Savings
  • Easier Stock Control